Zebra Shades

Avon Zebra Shades From Avon Window Treatments

View and privacy on one tube, with real limits

Call (317) 854-7158Get Free Quote
Quick Answer

The questions below are the ones that come up during measures for this product. They're answered here so you can think about them before somebody is standing in your room waiting for a decision.

  • Service: Zebra Shades for Avon homeowners
  • Service area: Avon, IN and surrounding areas
    • The measure is bookable soon. Fabrication is the fixed cost in time, generally two to five weeks and longer on specialty shapes. If you have a date you're working toward, tell us at the measure and we'll be straight about it.
  • Insured and bonded
  • Serving Avon, IN since 2008
Zebra Shades Services

Expert Zebra Shades for Avon Homes

Zebra shades, sold in some catalogs as banded or dual shades, alternate sheer and opaque stripes on one roller tube, so a few inches of travel takes you from view through to privacy without changing product. They suit Avon's newest interiors. Brookstone's Crossings collection runs from the 2,899 square foot Hilltop up to the 3,300 square foot Westchester, and those plans carry the wide rear openings that want a clean headrail. Cedar Bend carries a Contemporary vocabulary among its five styles inside 52 lots. Grand Haven at Wynne Farms, the Pulte section published at roughly $240,000 to $400,000, is the other place we hang a lot of them.

The disclosure list runs longer than the marketing does. Band alignment drifts on long drops, so a 96 inch shade needs occasional re tracking, and that isn't a defect. The headrail is deeper than a plain roller because the fabric wraps a larger diameter, which matters across the 39.9 percent of Avon housing built since 2010, where drywall returns with no casing often can't take an inside mount at all. Closed, a zebra shade is still not blackout: light passes at the band seams and around both sides. The bottom rail also has to hang clear of the sill, or the bands stop closing evenly across the width.

When to Call

Signs You Need Zebra Shades

If you notice any of these in your Avon home, it is worth booking a measure. None of it is urgent, and none of it fixes itself either.

Sheer bands have gone brittle on south glass

A chain loop hangs loose beside a crib

A cassette is missing and the roll shows

Older banded shades separate along the seam

A front room faces a sidewalk with nothing on it

Old dual shades no longer line up when closed

Shades in one room stop at different heights

One window needs both a view and privacy

Sheers behind a blind look cluttered on one window

Bands on an existing shade have started to pill

Our Process

How Avon Window Treatments Handles Zebra Shades

Every job follows the same five-step process. Transparent, thorough, and done right the first time.

1

Corner-to-corner check for square

2

Cassette depth measured carefully

3

Alignment and offset both tested

4

Tube sized for doubled weight

5

Care routine handed over

Real Project Photos

Zebra Shades in Avon

Photographs from real zebra shades jobs completed by our crew in Avon and surrounding areas.

Custom shades measured and installed in AvonPlantation shutters fitted to a Avon windowCellular shades in a Avon living room
Scope of Work

What Zebra Shades Includes

Every Avon job is documented item by item. Here is what the crew covers.

Band alignment shown to you on a working sample before anything is ordered, because that's the entire mechanism

Band height chosen against the opening so the stripes stay in proportion on a short window

Sheer and solid band opacity picked as a pair, light filtering, room darkening or a blackout-backed tier

Cassette specified as the default, since a bare double-layer roll reads unfinished at the top of an opening

Three widths and three heights at every opening, with the diagonal checked for square

Mounting depth measured for the cassette, which needs more room than a plain roller bracket does

Tube and fabric weight matched, because a zebra carries roughly twice the fabric of a single-layer roller

Roll direction and control side set at the measure and written onto the order

Light gap per side disclosed, plus the light that passes the sheer bands even in the closed position

Rooms that need genuine darkness identified early and steered to a different product or a layered pair

Night behavior explained before anyone buys one for a bedroom, since aligned bands work both directions

Height limits reviewed, because band registration drifts more on very tall units than on short ones

Chain tensioner fastened to the wall or frame exactly as the product instructions require

Motorized lift offered where hitting an exact band position by hand would get tiresome daily

Products specified to conform to ANSI/WCMA A100.1-2022 for cord access

Hembar and cassette finish coordinated with the fabric so hardware doesn't fight the banding

Bracket substrate confirmed ahead of install day, drywall, plaster, hardwood trim or steel

Every shade run to full alignment and full offset on install day so you can see both positions working

Pricing

What Zebra Shades Cost in Avon

National category figures put stock shades near $60 to $600 a window and custom-fabricated shades roughly $250 to $2,600. Those are national ranges for the category, not a quote for anything in Avon. Zebra sits above a plain roller in that band, and the reason is straightforward: there are two fabric layers on one tube instead of one, and a cassette is nearly always part of the specification rather than an upgrade. Band opacity is the next lever, since a room darkening or blackout-backed tier costs more than a light filtering one. Width and drop then do what they always do. Avon Window Treatments prices from measured openings around Hendricks County, never from a per-window average.

By Product

How Zebra Shades Differ by Product

Every product in this trade behaves differently in a room. Here is what that means for this work.

Light filtering bands: The common tier. Solid bands that diffuse rather than block, so aligned or offset you always have a bright room. It's the right pick for a living space where the shade is about softening daylight and choosing when to be seen.

Room darkening bands: A denser solid band that cuts most light through its face when the bands are offset. It gets a bedroom to genuinely dim. The sheer bands still pass light in the aligned position, which is the honest limit of the format.

Blackout-backed bands: An opaque backing laminated to the solid bands, which is as dark as this format gets. It's darker than room darkening and still not a blackout install, because the sheer bands and the side gaps are both still there.

Narrow bands: Roughly 2 inch banding, which reads finer and suits shorter windows and smaller rooms. More band pairs cross the same drop, so the stripe pattern is subtler and the view through the aligned position is cut into thinner slices.

Wide bands: Roughly 3 inch banding, which gives a bolder stripe and a more open view when aligned. It belongs on tall windows and large openings where narrow banding would look busy across that much glass.

Cassette headbox: A closed box over the tube, and on a zebra it's effectively standard rather than an option. Two fabric layers rolling together look unfinished on a bare tube, and the cassette also gives the top light gap somewhere to hide.

Continuous cord loop with a clutch: A bead chain over a clutch, which is the standard manual control and the one that gives you the finest positioning. Hitting an exact band alignment wants small adjustments, and a chain does that better than a spring does.

Cordless lift: No chain beside the window, with a spring taking the weight. It suits smaller openings and rooms where nothing should hang. Be aware that fine band alignment is harder to hit by hand than it is with a chain.

Motorized zebra: A motor makes real sense on this product, because you can save the aligned position and the offset position as scenes and return to them exactly. On a bank of windows it's the difference between using the feature and ignoring it.

Outside mount with wide overlap: Mounting above and past the opening so the fabric overlaps the trim on both sides. It cuts the side light that an inside mount always leaks, which matters more here because the format can't be sealed the way a channel-run blackout can.

Light Control

See What Each Fabric Does To The Light

Pick a fabric below and the window updates. It's a drawing rather than a photograph, so read it as a rough guide to what each family does in a Avon room, and to what it doesn't do.

Fabric type

Sheer, 10 percent openness

Ten percent of the weave is open, so you keep the view and most of the daylight. Glare drops a little. After dark, once your lamps are on, someone outside can read shapes through it, which is why this belongs on a view window rather than a bedroom.

Openness factor is printed on the fabric card, so you can compare one line against another before you order anything.

Keeps the viewNot private after dark

Solar, 5 percent openness

The usual pick for a west window or a covered porch. You can still read the yard through it, glare comes down noticeably, and the fabric intercepts a good share of the sun before it reaches you at four in the afternoon.

It also cuts the UV landing on floors and furniture. NFRC puts UV at roughly 40 to 60 percent of fading damage, so this slows fading rather than stopping it.

View and glare controlSlows fading

Solar, 3 percent openness

A tighter weave. The room goes dimmer and the view drops back to an outline. Choose it where the sun is the problem and the view is second, which around here usually means a west wall in July. That's a common call on this side of Indianapolis.

Openness affects how much you see out, not how private you are. A 3 percent fabric still shows silhouettes at night.

View becomes an outlineStrong glare control

Solar, 1 percent openness

Close to a solid fabric with a little view left in it. This is the strongest glare control in the solar family.

The trade is that it darkens the room on a gray January day too. Indianapolis averages a January high near 36F and the light is flat, so think about how the room reads in both seasons before you commit.

Darkest solar optionDim on gray days

Light filtering

No view through it. Daylight comes through the face diffused, so the room stays bright without a hot spot across the television or the kitchen island. This is the default for living spaces.

It isn't private in reverse at night. With the lamps on and the sun down, silhouettes still show.

No view through itBright without the glare

Room darkening

A denser fabric, usually with a liner behind it. Most of the light coming through the face is gone.

Light still arrives around the edges on an inside mount, so a room darkening shade gives you a dim room rather than a dark one. If someone in the house sleeps during the day, say so at the measure and we'll scope it differently.

Dim, not darkEdges stay bright

Blackout

The fabric itself passes essentially no light. What you'll still see is the perimeter. Lutron publishes an inside-mount light gap of about 3/4 inch per side on its Roller 20 and 64 shades, along with a standard factory deduction of 1/16 inch per side, and shades over 120 inches tall or past a 4:1 height-to-width ratio get larger gaps than that.

So if you need a genuinely dark bedroom, that gap has to be dealt with on purpose, either with side channels or by going outside mount. We tell you which one your opening can carry while we're still standing in the room.

Dark facePerimeter needs a plan

Openness factor is a measured fabric spec, so you can compare it line to line. The category names are not measured. One maker's room darkening can behave like another maker's light filtering, which is why the sample books come to the measure and get opened in the room they're going in, at the hour that room has the problem.

Common Questions

Zebra Shades FAQ

Questions we hear most often from Avon homeowners considering zebra shades.

Not forever, and you should know that going in. The two fabric layers are joined at the top and travel together, but they stretch at slightly different rates and the front layer can creep sideways over months of daily use. On drops past about 90 inches the misalignment becomes visible as a soft edge where the stripes should be crisp. Correcting it means running the shade fully down and fully up to re track the layers, which takes seconds. On the tall rear openings in Brookstone's Crossings plans at 2,899 to 3,300 square feet, expect to do it a few times a year.
Often not, and this is the single most common surprise in Avon. About 39.9 percent of the housing stock here went up between 2010 and 2025, and current production practice in Hendricks County leans heavily on drywall returns with no applied casing at all, which leaves very little usable depth in front of the glass. A zebra headrail is deeper than a standard roller because the fabric wraps a bigger tube. We measure the actual depth at the stop before quoting. Where it isn't there, an outside mount above the opening looks intentional and closes the side gaps as a bonus.
No. Even with the bands fully closed, light comes through the seams where sheer meets opaque and around both sides of the shade, and the opaque band on most zebra fabrics is room darkening rather than blackout to begin with. For a bedroom that has to be dark we hang a blackout roller with side channels, or an outside mounted blackout with two to three inches of overlap per side. A zebra shade is a fine second layer in that room for daytime use, and in the four and five bedroom plans at Brookstone we often do exactly that on the windows that aren't the sleeping wall.
Solar if the glare is constant, zebra if you want the room to change through the day. Brookstone is marketed on pond views with no established canopy, so those rear windows take unbroken sun, and a fixed solar mesh at 3 or 5 percent openness handles that all afternoon without anyone touching it. A zebra lets you open the sheer bands in the morning for full view and close them at four o'clock, which is more control and more handling. Households that adjust their shades daily prefer zebra. Households that set them once are happier with solar.
Yes, and we won't leave a job without it. A zebra shade runs on a continuous cord loop or a bead chain, and an unanchored loop is exactly the hazard the industry standard is written around. The products we order conform to ANSI/WCMA A100.1-2022, which is a product standard rather than something a company gets certified in, and inner cords a child can pull into a loop are treated as a substantial product hazard under 16 CFR 1120.3. The tensioner anchors into the wall or the trim and keeps the loop taut. In a house with children we'd rather quote motorization and skip the chain entirely.
Sometimes, and it's cheaper to decide up front. A manual zebra runs on a clutch sized to the tube; motorizing means pulling that clutch and fitting a motor inside the same tube, which works only if the tube diameter matches the motor and the fabric was cut for the right roll direction. On a shade already hanging, the honest answer is often a new shade. If there's any chance you'll want power later, say so at the measure and we'll spec the tube accordingly. National figures put motorized window coverings at roughly $300 to $1,500 per window installed.
It's a single fabric made of alternating sheer and solid horizontal bands, joined into a loop that rolls on one tube. As the shade moves, the front layer's bands slide against the back layer's. Line the solid bands up with the sheers and you get a view out through horizontal windows of sheer fabric. Offset them so solid sits over sheer and the face closes up for privacy. One product doing two jobs on the same tube, which is the whole reason to buy one.
Dimmer, not dark, and this is where expectations need setting before you order. Even in the fully offset position, the sheer bands are still part of the fabric and they still pass light, so the face is never fully opaque the way a blackout roller is. A blackout-backed tier gets you further and still isn't a light seal. If a bedroom genuinely has to be dark, the honest answer is a blackout roller in side channels, or a zebra paired with one on a dual bracket.
Yes, and it's the same reversal that catches people out with solar shades. In the aligned position you're looking out through sheer fabric, and sheer fabric doesn't care which direction light travels. During the day it's brighter outside so the room stays private. After dark with lamps on, somebody outside sees in through those sheer bands quite clearly. The offset position closes that. So the nighttime routine is simply to offset the bands, which takes a moment.
Mostly, with occasional re-registering. The two layers are joined, so alignment is set by where the shade stops rather than by anything drifting apart. What does happen on tall units is that repeated partial travel lets the roll build slightly unevenly, and the position you thought was aligned lands half a band off. Rolling the shade all the way up and back down re-registers it. Very tall shades do this more than short ones, which is one of the things we check against height limits.
Match it to the opening rather than to a picture. Narrower banding around 2 inches reads finer, suits shorter windows and smaller rooms, and slices the aligned view into thinner strips. Wider banding around 3 inches gives a bolder stripe, a more open view when aligned, and it carries a tall window better. On a large opening narrow banding starts to look busy, and on a short window wide banding leaves you very few bands across the drop.
Because two fabric layers rolling together on a bare tube look like a mistake. On a single-layer roller an open roll is a legitimate clean look. On a zebra you're seeing a doubled roll with the band pattern wrapping around it, and it reads unfinished from below and from the side. The cassette also gives the top light gap somewhere to hide, and it keeps dust off the fabric sitting on top of the roll, which matters on a sheer that shows everything.
A roller gives you one fabric doing one thing, and you choose how much light it blocks. A zebra gives you two positions from one shade, so the same window can be open to the view or closed for privacy without changing anything but the height. What you pay for that is money, since there are two layers and a cassette, and darkness, since a zebra can't reach what a blackout roller in channels reaches. Neither one is a better product, they answer different questions.
They solve the same problem with different materials and different failures. A blind tilts rigid slats, which gives you very fine control of the angle and a hard edge to the look, and it collects dust on every slat. A zebra slides fabric bands, which gives you a softer face with nothing to dust individually, and a much cleaner look on a modern opening. The blind wins on precise light angling. The zebra wins on appearance and on not having a stack of slats.
They can work, with a caveat about the fabric. Most zebra fabrics are polyester and they handle bathroom humidity without complaint, so moisture itself isn't the issue the way it is with wood. What is worth thinking about is that sheer bands show water spots and marks more readily than a solid fabric, and a splash near a shower is visible on a sheer band. In a powder room it's a good specification. Right next to a shower head, a plain roller is easier to live with.
They can, and width is the honest constraint. A zebra carries roughly twice the fabric of a single-layer roller on the same tube, so the tube has to be sized for that weight or a wide shade will dip in the middle. Manufacturers publish maximum widths that are tighter than the ones for plain rollers. Past that, two units side by side is the answer, and we'd plan the band alignment across both so they read as one treatment rather than two.
This is one of the products where a motor earns its cost rather than just being convenient. Because the feature lives in exact stopping positions, being able to save an aligned scene and an offset scene and return to them precisely is genuinely better than eyeballing it twice a day. Installed motorization sits nationally at $300 to $1,500 per window. Plan for batteries as a recurring cost: Hunter Douglas states PowerView battery life is about one year.
They can be specified that way, and it's the lift that decides it. A cordless zebra has no lift cord on the product at all, which is the direction the ANSI/WCMA A100.1-2022 work on cord access points, and inner-cord non-compliance is treated as a substantial product hazard under 16 CFR 1120.3. The tradeoff is that hitting an exact band alignment by hand is fussier without a chain. In a child's room we'd take cordless or a motor over the finer control every time.
Gently, and mostly with air. Sheer bands are fine mesh and they hold dust rather than shedding it, so a vacuum on low with a brush head across the face is the routine maintenance. Don't scrub a sheer band, because you can distort the weave and it doesn't recover. Spot marks come off with a barely damp cloth blotted, not rubbed. The cassette catches dust on top of the roll, which is one more reason it's worth having.
Two to five weeks is the usual custom fabrication window, and zebra tends toward the middle of it since the fabric is assembled from two layers before the shade is built. Motorized units add a step. That window goes into your paperwork along with scope, dates and total price, which the Indiana Home Improvement Contract Act requires on residential work over $150. If a factory date moves, we pass it along in the week we hear about it rather than letting you find out.
Areas We Serve

Zebra Shades Across Avon

We measure and install in every one of these Avon neighborhoods. Each has its own page with the build eras, window conditions and mounting notes for that section.

Related Services

Other Window Treatment Services in Avon

Avon Window Treatments handles the full scope of window treatment work. Explore our other services below.

Faux Wood Blinds in Avon

The blind that shrugs off an Avon August

Learn more →

Wood Blinds in Avon

Basswood for the rooms with stained casing

Learn more →

Vertical Blinds in Avon

Still the honest answer for a wide patio slider

Learn more →
Free In-Home Measure

Schedule Your Free In-Home Measure in Avon

Contact Information

Reach Us Directly

Our team prioritizes scheduled measures and service calls, and books in-home measures during business hours.

Office
1417 Commerce Avenue, Indianapolis, IN 46201
Hours
Mon-Fri 8a-6p
Service Area
Avon, IN and Surrounding Areas

Ready to Book Your Measure?

Call us to set up an in-home measure, or to ask about a treatment that has stopped working. We will talk it through on the phone first.

Call (317) 854-7158
Service area

Serving Avon and the surrounding area

Call NowGet Quote