Commercial Window Treatments

Commercial Window Treatments Throughout Avon

Specified by elevation, documented opening by opening

Call (317) 854-7158Get Free Quote
Quick Answer

This section covers what the product does well, where it struggles, and what it costs to own over time rather than just to buy. All three matter on a purchase you'll live with for years.

  • Service: Commercial Window Treatments for Avon homeowners
  • Service area: Avon, IN and surrounding areas
    • The measure gets scheduled quickly. The build does not, because your fabric or shutter panel is cut to your numbers after you order. Two to five weeks is normal. Service calls skip that step entirely.
  • Insured and bonded
  • Serving Avon, IN since 2008
Commercial Window Treatments Services

Expert Commercial Window Treatments for Avon Homes

Commercial work in Avon follows the corridors. US 36, which everyone here calls Rockville Road, carries the retail and dining spine, Ronald Reagan Parkway carries the traffic across it, and Republic Development has begun a roughly $500 million project on 500 acres that includes a shopping district and a 65-acre Riverwalk District. The town issued 354 single family permits in the first eight months of 2025, more than Brownsburg at 277 or Plainfield at 176, and that kind of household growth is what fills the offices and the suites behind those storefronts. We spec by elevation rather than by room: solar mesh on the sun side, room darkening where screens live.

A few things a commercial buyer should hear before the order. The Indiana Home Improvement Contract Act, IC 24-5-11, governs residential jobs over $150 and does not reach a commercial purchase, so the scope and the total price have to be written into your own purchase order instead of leaning on a consumer statute. Dye lots move between production runs, so a building finished in phases needs its fabric reserved up front. The products we order conform to ANSI/WCMA A100.1-2022, which is a product standard and never a company credential. We're insured and insured, and lead time is 2 to 5 weeks.

When to Call

Signs You Need Commercial Window Treatments

If you notice any of these in your Avon home, it is worth booking a measure. None of it is urgent, and none of it fixes itself either.

One elevation is three years newer than the others

Housekeeping finds guests taping the edges shut

Batteries in the boardroom died again last quarter

Nobody can identify the fabric to reorder one shade

A submittal came back asking about flame testing

Half a floor got new shades and the rest waited

A training room can't hold contrast on the screen

Nobody knows which vendor supplied the existing units

Guest rooms get complaints about morning light

Existing blinds are broken across a whole floor

Our Process

How Avon Window Treatments Handles Commercial Window Treatments

Every job follows the same five-step process. Transparent, thorough, and done right the first time.

1

Site walk with facilities

2

Approvals returned, order released

3

Install phased around operating hours

4

Punch list walked and closed

5

Openness factor set per exposure

Real Project Photos

Commercial Window Treatments in Avon

Photographs from real commercial window treatments jobs completed by our crew in Avon and surrounding areas.

Custom shades measured and installed in Avon
Scope of Work

What Commercial Window Treatments Includes

Every Avon job is documented item by item. Here is what the crew covers.

Site walk with the facilities contact to log every opening, elevation and existing condition

Openings measured individually rather than typed off a floor plan, because as-built rarely matches drawn

Occupancy and fire requirements confirmed with the authority having jurisdiction before fabric selection

NFPA 701 flame propagation test documentation obtained and included in the submittal package

Fabric, hardware and finish samples submitted for approval before anything is released to fabrication

Control type and mounting height set against ADA section 308 reach ranges where the space requires it

Operating force checked against the ADA section 309.4 limit of five pounds on operable parts

Motorization specified wherever a manual control can't meet reach or force requirements

Openness factor selected per elevation so screens and monitors stay usable through the day

Dual roller assemblies drawn where one opening needs both glare control and darkness

Coupled tubes specified on wide spans so a run of openings reads as one continuous line

Written lead times issued with the order and updated in writing whenever the factory moves a date

Install phased around operating hours, floor by floor or wing by wing, with access arranged in advance

Elevator, loading and badge access coordinated so crews aren't working out of a corridor

Debris and packaging removed daily rather than staged in occupied space

Attic stock quantities agreed up front so a damaged unit can be swapped without a new order

Punch list walked with the owner's representative and closed out in writing

Operation, cleaning and parts information handed to facilities in a document they can actually find later

Pricing

What Commercial Window Treatments Cost in Avon

Commercial pricing works per opening the same way residential does. The national ranges to anchor against are roughly $250 to $2,600 per window for custom-fabricated shades and roughly $300 to $1,500 per window installed for motorized product. Those are national category ranges, not a bid for a building in Avon, and nobody should treat them as one. Quantity helps on a large floor plate, and fire-rated fabric, submittal work and phased after-hours access all push the other way. A property in Hendricks County with a hundred identical openings prices very differently from one with forty odd shapes. Avon Window Treatments bids from a measured opening schedule, with the fire documentation and the control specification written into it.

By Product

How Commercial Window Treatments Differ by Product

Every product in this trade behaves differently in a room. Here is what that means for this work.

NFPA 701 tested screen fabric: Solar screen woven and tested to the NFPA 701 flame propagation standard, with the test documentation available for the submittal. This is the starting point for any occupancy where the code official asks for it in writing.

Dual roller assembly: Two shades on one bracket set, typically a solar screen in front and a room darkening fabric behind. It lets a conference room work as a daylit space in the morning and a presentation room in the afternoon.

Continuous cord loop with tensioner: The manual control that handles weight best on large commercial units. The tensioner is fastened per the manufacturer instructions, and in child-occupied spaces we look at cordless or motorized instead.

Cordless lift: No accessible operating cord at all, which is what you want in classrooms, childcare rooms and paediatric spaces. It limits practical size, so past a point the answer becomes a motor rather than a bigger spring.

Low-voltage motorization: Hardwired motors with a wall keypad, which is the durable answer in a building where nobody wants to change batteries on a schedule. The power work is done by a licensed electrical contractor as part of the trade coordination.

Battery motorization for retrofit: Where opening a finished wall isn't on the table, battery or rechargeable motors get automation into an existing space. Budget for the replacement interval, because a floor of battery shades is a recurring facilities task.

ADA-height wall keypad: A fixed control placed inside the reach ranges in ADA section 308 and operable well under the five pound force limit in 309.4. It's often the cleanest way to satisfy accessibility on an opening a chain never could.

Light-blocking pocket and side channels: A pocket at the header plus channels at the jambs, so a training room or a sleep room goes properly dark instead of dim. It's the difference between a blackout fabric and a blackout result.

Wipeable vinyl-faced fabric: A non-porous face that takes repeated cleaning without breaking down, specified in clinical areas and food service where the surface has to be wiped down as a matter of routine.

PVC vertical blinds: Still the right answer for multifamily turns and back-of-house openings. Individual vanes replace cheaply when one gets damaged, which matters far more than aesthetics when a unit turns every year.

Common Questions

Commercial Window Treatments FAQ

Questions we hear most often from Avon homeowners considering commercial window treatments.

Only if we reserve the fabric at the first order. Every fabric is produced in dye lots and the color moves between them, which nobody notices between floors and everybody notices along one corridor of identical windows in a Rockville Road suite. For a phased fit out we calculate the total yardage for the whole building at the start, put it on one reservation, and draw from it as each phase completes. Where a client can't commit to phase two yet, we document the exact lot number so a later order has the best possible chance, and we tell you plainly that a match isn't guaranteed.
Here's the honest legal picture. The CPSC custom operating cord rule at 16 CFR Part 1260 was vacated on 12 September 2023, so there is no federal operating cord rule for custom window coverings to comply with and nobody should tell you otherwise. What remains in force is the inner cord substantial product hazard rule at 16 CFR 1120.3, and the industry product standard ANSI/WCMA A100.1-2022. For a daycare, a pediatric suite or a school adjacent space along Rockville Road, we specify cordless or motorized throughout, because the specification is the buyer's decision rather than a regulator's.
Solar mesh sized to the glass, and openness chosen for what happens at the counter. A west elevation on Rockville Road takes direct low sun through the last hours of trading, and in July, when Avon averages an 85.2 degree high, that is both a heat problem and a screen glare problem for anyone working a register. Three percent openness kills most of the glare while keeping the street visible from inside, which retail tenants care about. Where merchandise sits in the window, we add a second layer, since fading is slowed by mesh rather than undone by it.
Two to five weeks for custom fabrication once measurements are approved, and that's the industry norm rather than a promise we invented. The measure itself takes a morning on a suite that size. Install runs in sequence, floor by floor, so a working office keeps most of its space usable throughout. Nothing in this trade is urgent, and anyone offering to compress a custom fabrication schedule is either holding stock sizes or cutting a corner. If your fit out has a hard date, tell us at the survey and we will work backward from it.
We do, and the parts that need it are predictable. On a manual roller it's the clutch and occasionally the bracket; on motorized units it's batteries, and a commercial installation is exactly where hardwired power earns its cost, because Hunter Douglas puts PowerView battery life at about one year and nobody wants a ladder in an Avon lobby every twelve months. We record each shade's finished width and drop, its fabric and its lot number at install, so a replacement five years later starts from a record rather than a fresh measure. Service parts are ordered against that same record.
It needs one that's at least as detailed, though for a different reason. IC 24-5-11 requires a written contract on residential work over $150, carrying a detailed scope and the total price, and commercial purchases fall outside that statute, which means the protection has to come from the document you sign rather than from Indiana code. We write commercial quotes the same way regardless: every opening listed with its finished width, its finished height, its mount type, its fabric and its lot number, plus the install sequence. We're insured and insured, and the paperwork reaches your building manager before we arrive on site.
It depends on the occupancy and on what your code official requires, which is why we ask before we specify. NFPA 701 covers flame propagation testing for textiles hung vertically, and assembly, healthcare, education and hospitality spaces are where it most often comes up. The part that trips projects isn't the fabric, it's the paperwork. Test documentation has to be in the submittal package, and a fabric someone believes is compliant without a document behind it will get rejected at review.
Two sections do most of the work. Section 308 sets the reach ranges for operable parts, which decides how high a chain, wand or keypad can sit and how far it can be from where somebody can get to. Section 309.4 caps the force to operate at five pounds and requires one-hand operation without tight grasping or twisting. A heavy chain on a large shade can fail that force test. When it does, the answer is usually a motor and a keypad rather than an argument.
That's the normal way we do it. Work gets phased by floor, wing or suite, with a schedule agreed in advance so nobody's meeting is happening under a ladder. Some scopes are better after hours and some are fine mid-morning in an empty conference room. We sort out badge access, elevator use and where the boxes stage before the first crew day, because the thing that actually derails a commercial install is access, not product.
Offices, healthcare, education, hospitality and multifamily, and each one changes the specification. Healthcare wants wipeable surfaces and infection control input. Education wants cordless lifts and hardware that survives teenagers. Hospitality wants blackout that genuinely works, because a guest who can't sleep leaves a review about it. Multifamily wants a product that's cheap to repair one vane at a time. Offices want glare control on the monitors. The building type usually tells us the fabric before the design conversation starts.
Custom fabrication generally runs two to five weeks, and a large commercial order with submittal review and approval on top of that runs longer. The sequence matters: samples out, approvals back, then release to fabrication, and the clock on the factory doesn't start until approval lands. We put every date in writing and we update it in writing when the factory changes it. Building a schedule around a verbal lead time is how a project ends up with bare openings at occupancy.
Three percent is the common answer on the elevations that get direct sun, with five percent where the exposure is gentler and view matters more. The test isn't how the fabric looks in a sample book, it's whether somebody can read a monitor at the worst hour of the day. We'll hang a sample on the actual elevation and let people sit under it. Getting this wrong across a floor of a Avon building is expensive, and it's entirely avoidable.
Yes, and we treat both as part of the scope rather than a favor. Submittals include fabric and hardware samples, cut sheets, the fire test documentation where the occupancy requires it, and a shade schedule tied to the opening numbers. At closeout, facilities gets operation and cleaning information, the fabric and hardware identification for reorders, and the attic stock count. That last one saves a lot of trouble two years later when somebody needs one shade replaced and nobody remembers the fabric.
Motorize where a manual control fails on reach, force or height, where the openings are high or behind furniture, and where the shades should move on a schedule rather than on somebody remembering. Leave manual where the openings are ordinary and reachable, because motors add cost and a maintenance obligation. The mistake we see most is motorizing a whole floor to solve a problem that exists on one elevation. Specify per opening, not per building.
They're the right answer in a retrofit where nobody's opening a finished wall, and they come with an obligation you should accept before you buy. Hunter Douglas states PowerView battery life is about one year, and commercial use with daily scheduled cycles doesn't improve on that. Multiply by the opening count and you have a recurring facilities task. Where power can be brought to the header, hardwired low-voltage motors are the better long-term call, with a licensed electrical contractor doing that part.
They get treated as one line, not as separate shades that happen to be near each other. Tubes are coupled where the spans call for it so the shades track together, and hembars are aligned so a partly lowered run doesn't look ragged from the street. On a motorized job the group is addressed to one control so nobody has to press five buttons. This is the detail that separates a commercial install that looks intentional from one that looks assembled.
A blackout fabric alone gets you dim, not dark, because light comes around the edges of any inside mount. For a room where a projected image has to hold contrast, we specify blackout fabric with a light-blocking pocket at the header and side channels at the jambs. If the room also gets used for daylit work, we run a dual roller so the screen fabric handles the everyday condition and the blackout comes down only when it's needed.
Often, and it's worth a conversation before you assume it. Bring us a shade or the original paperwork and we'll identify the fabric and hardware if it's still made. Two honest cautions: fabrics get discontinued, and fabric still in production runs in dye lots, so a new run can sit slightly off older shades on the same floor. Where the match won't hold, replacing a whole elevation at once usually looks better than patching one opening.
We are, and we insist on field measuring rather than working from the drawings. As-built openings differ from the plan more often than not, and a shade schedule built from a drawing produces a stack of product that doesn't fit and can't be returned. That means we need the openings framed and reasonably finished before we measure, which affects the schedule. We'd rather have that conversation with the general contractor early than explain a reorder later.
This is why attic stock is agreed at the start. A few spare units in the common sizes mean facilities swaps the damaged one the same week instead of waiting on a fabrication run for a single shade. Where a spare isn't available, we reorder from the shade schedule using the opening number, the fabric and the finished sizes we recorded. That record is the reason we hand over documentation rather than assuming somebody kept the packing list.
Areas We Serve

Commercial Window Treatments Across Avon

We measure and install in every one of these Avon neighborhoods. Each has its own page with the build eras, window conditions and mounting notes for that section.

Related Services

Other Window Treatment Services in Avon

Avon Window Treatments handles the full scope of window treatment work. Explore our other services below.

Faux Wood Blinds in Avon

The blind that shrugs off an Avon August

Learn more →

Wood Blinds in Avon

Basswood for the rooms with stained casing

Learn more →

Vertical Blinds in Avon

Still the honest answer for a wide patio slider

Learn more →
Free In-Home Measure

Schedule Your Free In-Home Measure in Avon

Contact Information

Reach Us Directly

Our team prioritizes scheduled measures and service calls, and books in-home measures during business hours.

Office
1417 Commerce Avenue, Indianapolis, IN 46201
Hours
Mon-Fri 8a-6p
Service Area
Avon, IN and Surrounding Areas

Ready to Book Your Measure?

Call us to set up an in-home measure, or to ask about a treatment that has stopped working. We will talk it through on the phone first.

Call (317) 854-7158
Service area

Serving Avon and the surrounding area

Call NowGet Quote