Woven Wood Shades

Avon Woven Wood Shades

Natural weave for houses with real canopy

Call (317) 854-7158Get Free Quote
Quick Answer

If you've narrowed things down to this product, these answers should confirm the choice or steer you elsewhere. Either outcome is fine. Ordering the wrong thing in custom sizes is the expensive mistake.

  • Service: Woven Wood Shades for Avon homeowners
  • Service area: Avon, IN and surrounding areas
    • We book measures without much delay. What you can't compress is the fabrication window, which runs two to five weeks depending on the product and the finish. Painted shutter finishes sit at the longer end.
  • Insured and bonded
  • Serving Avon, IN since 2008
Woven Wood Shades Services

Expert Woven Wood Shades for Avon Homes

Woven woods bring texture to houses that are otherwise all brick and drywall. Timber Bend is the obvious fit: every home there is brick with cedar and stone accents, lots run a 0.72 acre average with mature trees and rolling ground, and a reed or bamboo weave answers that setting in a way a flat fabric can't. Cedar Bend does the same on streets named Scarlet Oak Drive and Ash Court, where five architectural styles share 52 lots. In Prestwick, where the canopy has been growing since the course opened in 1974, a natural weave reads as part of the view rather than a barrier across it.

Understand what a woven material is before you buy one. It's a weave, so it passes light through the gaps between reeds, and after dark a lamp behind it will show shapes to anyone outside. A liner solves privacy and adds stack, since the liner folds along with the weave and the whole assembly is thicker. Natural material also varies: color shifts within a single shade and shifts more between shipments, so a shade ordered next year for the same room won't match. On drops past about 8 feet these get heavy enough that a cordless lift stops being the right hardware.

When to Call

Signs You Need Woven Wood Shades

If you notice any of these in your Avon home, it is worth booking a measure. None of it is urgent, and none of it fixes itself either.

Bare windows on a sunroom or a porch

A wide natural shade sags in the middle

A cat has climbed one shade to the top

People can see in through the weave at night

The weave you want may be discontinued soon

A room reads cold with nothing but hard surfaces

Afternoon sun is harsh but the view matters

Aluminum blinds feel wrong in a warm room

A shade over the sink has warped from water

A neighbor looks straight into a lit room

Our Process

How Avon Window Treatments Handles Woven Wood Shades

Every job follows the same five-step process. Transparent, thorough, and done right the first time.

1

In-home measure with real samples

2

Mounting depth and stack figured

3

Edge banding and valance specified

4

Lift type and cord safety set

5

Outside mount width decided

Real Project Photos

Woven Wood Shades in Avon

Photographs from real woven wood shades jobs completed by our crew in Avon and surrounding areas.

Custom shades measured and installed in AvonPlantation shutters fitted to a Avon windowCellular shades in a Avon living room
Scope of Work

What Woven Wood Shades Includes

Every Avon job is documented item by item. Here is what the crew covers.

Three widths and three heights at every opening plus a diagonal check, because a natural weave shows an out-of-level hem plainly

Inside-mount depth checked against the bundled material, which needs more room than a rolled fabric does

Stack height figured against the actual weave, since a natural material bundles much deeper than a roller of the same size

Material chosen by weave and fiber: split bamboo, flat reed, jute, grasses or a mixed weave with wood

Samples left in your own daylight for a day, because these read nothing like they do under a showroom bulb

Privacy liner decided window by window, light filtering or room darkening or none, and written on the order

The liner's effect on the look shown with a sample held behind the weave before you commit to it

Edge banding specified anywhere a cut edge would ravel or read unfinished against painted trim

Valance style and depth chosen so the headrail is actually covered rather than half hidden

Top-down bottom-up specified where a room wants daylight up high and cover down low

Lift specified as cordless, a cord loop with a tensioner, or a motor sized to a heavy lined natural

ANSI/WCMA A100.1-2022 cord safety applied per opening, and cordless specified in any room a child uses

Natural variation between the hand sample and the production run explained before the order goes in, not after it arrives

Every shade for one room ordered on the same purchase so the material comes off the same run

Openings over a cooktop or inside the spray of a shower identified and moved to a different product

Extension brackets specified where a shallow opening won't take an inside mount cleanly

Headrail brackets landed in framing, since a wide natural with a liner is heavier than it looks

Folds dressed and the shade cycled on install day so the material learns to stack evenly

Pricing

What Woven Wood Shades Cost in Avon

National category figures run about $60 to $600 per window for stock shades and about $250 to $2,600 per window for custom-fabricated ones. Read those as national ranges for a category rather than a price for a house in Avon. Naturals sit across a surprisingly wide part of that band. A basic split bamboo on a small opening is near the bottom. A hand-woven grass with a room darkening liner, edge banding and a waterfall valance on a tall window is a different animal. The liner is the single biggest add most people don't budget for, and it roughly changes what you're buying. Avon Window Treatments prices from measured openings in Hendricks County, with the liner decision made before the number is written, not bolted on afterward.

By Product

How Woven Wood Shades Differ by Product

Every product in this trade behaves differently in a room. Here is what that means for this work.

Split bamboo: Round or halved bamboo canes woven with cotton or jute string. It's the most familiar natural look, it hangs with a strong horizontal line, and the gaps between canes are exactly where light and sightlines get through at night.

Flat reed: Flattened reed woven tight, giving a smoother face and a finer scale than round bamboo. It reads more refined in a formal room, and because the weave packs closer it holds back a little more daylight on its own.

Jute and grass weaves: Softer fibers with visible slubs and color shifts running through the material. This is where the texture argument gets won, and it's also where variation between one shade and the next is most obvious. That variation is the material, not a fault.

Mixed weave with wood: Thin wood slats woven in among reed or grass, adding a stiffer horizontal element and usually a second color. It bridges the gap between a natural shade and a wood blind, and it stacks a bit tighter than an all-grass weave.

Light filtering privacy liner: A fabric backing sewn behind the weave that blocks sightlines while letting a soft glow through. It's what makes a natural shade usable in a bedroom, and it hides the weave from inside the room when the shade is down.

Room darkening liner: A denser backing for bedrooms that need real darkness through the material. It adds weight and stack depth, and it stops the woven texture reading from inside entirely, so you get the look from the street and a flat panel from the sofa.

Edge banding: A cloth or matching-material tape finishing the cut sides of the shade. It stops a raw woven edge from raveling, and on a shade sized down from stock width it's the difference between looking made and looking cut.

Waterfall valance: The material carries up and over the headrail in one continuous piece instead of a separate flat panel. It hides the hardware without introducing a second horizontal line, which matters on a shade whose whole appeal is texture.

Top-down bottom-up: Two lift systems on one shade let you drop the top for daylight or raise the bottom for cover. On a street-facing room it gives you light at the ceiling and privacy at eye level without choosing between them.

Cordless lift: You raise and lower the shade by the bottom rail with nothing hanging beside the window. On a heavy natural with a liner the mechanism has to be sized for the real weight, so we specify the liner before the lift, not afterward.

Light Control

See What Each Fabric Does To The Light

Pick a fabric below and the window updates. It's a drawing rather than a photograph, so read it as a rough guide to what each family does in a Avon room, and to what it doesn't do.

Fabric type

Sheer, 10 percent openness

Ten percent of the weave is open, so you keep the view and most of the daylight. Glare drops a little. After dark, once your lamps are on, someone outside can read shapes through it, which is why this belongs on a view window rather than a bedroom.

Openness factor is printed on the fabric card, so you can compare one line against another before you order anything.

Keeps the viewNot private after dark

Solar, 5 percent openness

The usual pick for a west window or a covered porch. You can still read the yard through it, glare comes down noticeably, and the fabric intercepts a good share of the sun before it reaches you at four in the afternoon.

It also cuts the UV landing on floors and furniture. NFRC puts UV at roughly 40 to 60 percent of fading damage, so this slows fading rather than stopping it.

View and glare controlSlows fading

Solar, 3 percent openness

A tighter weave. The room goes dimmer and the view drops back to an outline. Choose it where the sun is the problem and the view is second, which around here usually means a west wall in July. That's a common call on this side of Indianapolis.

Openness affects how much you see out, not how private you are. A 3 percent fabric still shows silhouettes at night.

View becomes an outlineStrong glare control

Solar, 1 percent openness

Close to a solid fabric with a little view left in it. This is the strongest glare control in the solar family.

The trade is that it darkens the room on a gray January day too. Indianapolis averages a January high near 36F and the light is flat, so think about how the room reads in both seasons before you commit.

Darkest solar optionDim on gray days

Light filtering

No view through it. Daylight comes through the face diffused, so the room stays bright without a hot spot across the television or the kitchen island. This is the default for living spaces.

It isn't private in reverse at night. With the lamps on and the sun down, silhouettes still show.

No view through itBright without the glare

Room darkening

A denser fabric, usually with a liner behind it. Most of the light coming through the face is gone.

Light still arrives around the edges on an inside mount, so a room darkening shade gives you a dim room rather than a dark one. If someone in the house sleeps during the day, say so at the measure and we'll scope it differently.

Dim, not darkEdges stay bright

Blackout

The fabric itself passes essentially no light. What you'll still see is the perimeter. Lutron publishes an inside-mount light gap of about 3/4 inch per side on its Roller 20 and 64 shades, along with a standard factory deduction of 1/16 inch per side, and shades over 120 inches tall or past a 4:1 height-to-width ratio get larger gaps than that.

So if you need a genuinely dark bedroom, that gap has to be dealt with on purpose, either with side channels or by going outside mount. We tell you which one your opening can carry while we're still standing in the room.

Dark facePerimeter needs a plan

Openness factor is a measured fabric spec, so you can compare it line to line. The category names are not measured. One maker's room darkening can behave like another maker's light filtering, which is why the sample books come to the measure and get opened in the room they're going in, at the hour that room has the problem.

Common Questions

Woven Wood Shades FAQ

Questions we hear most often from Avon homeowners considering woven wood shades.

During the day, very little of anything specific, though you'll see light through the weave as a pattern of small bright points. Tight weaves in bamboo or jute read nearly solid. Loose reed weaves with visible spacing show silhouettes at close range, which on the 0.17 acre median lots at Avon Trails is close enough to matter. At night the arithmetic changes completely once a lamp is on inside. Where the window faces a street or a neighbor's window we add a liner, and where it faces the woodland at Timber Bend on a half acre plus lot, we usually leave it unlined.
It can be lined. Thin is the part you give up. A privacy or room darkening liner is sewn behind the weave and folds with it, so the raised stack grows by roughly a third over the unlined version, and on a long drop that difference is several inches of glass. There's a middle option: a liner that stops short of the full width, which keeps the edges translucent so the shade still glows at the sides. In Cedar Bend great rooms with big glass on the larger elevations, we usually mount above the opening so the fatter stack lands on wall rather than window.
Not exactly, and with this product that's a material fact rather than a defect. Reed and bamboo are agricultural materials, so color varies by harvest, by growing region and by the run a shade was woven in. Two shades from the same order can differ a little across a room. Two orders a year apart can differ enough to see side by side. Avon Estates buyers often phase a project across Sections 1 to 4 homes averaging 2,307 square feet, and where phasing is the plan we order all the material up front and hold the extra rather than trusting a reorder to match.
Poorly. The muggy stretch here runs from about May 25 to September 22, and natural fibers absorb that moisture and swell, then dry unevenly through a heated winter with a 36.1 degree January average high. What you get over a few cycles is a weave that ripples and a bottom rail that hangs crooked. Shower steam accelerates all of it. In a Timber Bend house where 55 percent of homes have a basement and the bathrooms are numerous, we specify faux wood or a washable roller in the wet rooms and save woven woods for the living areas.
Heavy enough to change the hardware. A woven shade carries far more mass per square foot than a roller fabric, and once you pass roughly 8 feet of drop, a cordless lift is working at the edge of what its spring can hold. Above that we move to a continuous cord loop with a wall anchored tensioner, or to a motor. Cedar Bend homes average just over 4,000 finished square feet and reach 6,705, so tall great room openings are common there, and that's exactly where the lift decision has to be made before the order rather than after.
They collect a little and shed almost nothing once they're a few weeks old. A new shade may drop a few loose fibers as it settles. After that, dust sits on the horizontal reeds the way it sits on a slat, and a vacuum brush across the face once a season handles it. What you can't do is wash one. Water stains natural fiber and swells it, so spills are permanent. That's the argument for keeping woven woods out of the cooking end of an open plan, which in Austin Lakes homes averaging 1,721 square feet is often the same room as everything else.
Unlined, no. This is the thing we say out loud before anyone orders. A woven natural is made of canes and fibers with gaps between them, and light passes both directions through those gaps. In daylight you can't see much from outside, so people assume they're covered. At night with the lamps on, the lighting flips and the room becomes visible in silhouette from the street. If a Avon room needs privacy after dark, it needs a liner, and that decision belongs in the quote.
It changes it, and there's no way around that. From the street the shade still reads as woven texture, because the weave is what faces out. From inside the room you're looking at the liner, so the grain and the shadow play you fell in love with are mostly gone when the shade is down. Some people order the liner anyway and love it. Others move the natural to a window that doesn't need privacy. We hold a liner sample behind the weave at the measure so nobody finds out later.
Because they're grass and reed and bamboo, grown outdoors, and they vary by harvest and by run. Two shades from the same order can differ a shade in tone or slightly in weave density, and both are correct. This is the same material that people pay extra for precisely because it isn't uniform. What we do about it is order every shade for a room at once so they come off the same production run, and show you a real hand sample rather than a printed swatch.
Yes, gradually. Natural fiber lightens with UV exposure, and a west-facing window will move faster than a north one. A liner slows it by taking some of the exposure, and so does keeping the shade partly raised during the hardest hours. Nobody in this trade can prevent it, and NFRC puts UV at roughly 40 to 60 percent of what causes fading, so the honest word is slowed. Over years, most naturals mellow rather than blotch, which is part of why the material ages well.
A kitchen window over the sink is fine. A window right beside a cooktop is not, because natural fiber takes on grease and cooking odor and never really gives it back. In a bathroom it depends on the room: a powder room is no problem, and a full bath with a shower running twice a day puts moisture into the fiber. If a shade is going to sit in the spray line, we move that opening to a poly shutter or a moisture-tolerant shade and keep the natural elsewhere.
A meaningful amount, more than a roller and often more than a cellular. Bamboo and reed don't compress, so raising the shade bundles the material into a thick stack at the top, and adding a liner makes that stack deeper still. On a short window the stack can take a real bite out of the daylight. We calculate the number at the measure, and where the view matters we mount outside the opening so the stack sits above the glass instead of on it.
Some, and less than a cellular shade. An unlined natural is mostly texture and shade, cutting glare and softening direct sun without adding much of a barrier. Add a liner and you get a bit more, mainly by cutting air movement at the glass. The documented energy testing in this trade sits with cellular shades, where DOE and ORNL work showed savings of up to 20 percent on heating energy against a bare window, and quoting that on a bamboo shade would be borrowing somebody else's result.
Dust regularly with a vacuum brush attachment on low suction, running with the weave rather than against it. A dry microfiber cloth works for touch-ups. Keep water off the fiber, since soaking swells the material and can leave a mark that dries in permanently. For a heavier clean, a soft brush and patience beat any liquid. If a liner picks up a spot, blot it rather than rubbing, because rubbing pushes the mark into the backing.
Yes. Cordless lift is available on most natural shades and it's what we specify in any room a child uses. ANSI/WCMA A100.1-2022 is the product safety standard behind that, and non-compliant inner cords are a substantial product hazard under 16 CFR 1120.3. The one thing to know is weight: a wide natural with a room darkening liner is genuinely heavy, and the cordless mechanism has to be spec'd for that weight or the shade won't hold where you put it.
Banding is a tape of cloth or matching material finishing the two cut sides of the shade. Natural material is woven in wide goods and then cut to your width, which leaves an edge where the weave wants to unravel. Banding closes that edge. On a shade that ends up close to a stock width you may not need it. On a shade cut down a long way you do, and it also gives you a chance to pull a second color out of the room.
Yes, and it's one of the better uses for the feature. A street-facing front room gets daylight from the top of the window while the lower part stays covered, which is exactly the problem naturals otherwise struggle with. The trade-off is a second lift system, more hardware in the headrail, and a stack at both ends of the shade. It also costs more. On a bedroom where you mostly want the shade all the way down, it isn't worth it.
They solve different problems. A solar shade is an engineered mesh with a stated openness factor, so it cuts glare and heat by a known amount while keeping the view out. A natural is texture and warmth, and its light control is whatever the weave happens to do. On a west-facing wall of glass where afternoon glare is the complaint, solar wins. In a room that reads cold and needs something organic against a lot of hard surfaces, the natural is the answer. Layering both happens often.
Assume not, and be pleasantly surprised. Natural material runs in production lots the way fabric runs in dye lots, and a bamboo woven next season can sit noticeably off the one you have. Side by side on the same wall in daylight, that shows. If you know another window is coming, order it now and store it. We'll record the material name and the run on your file, which improves the odds on a reorder without guaranteeing anything.
Individual canes can split over many years, usually in a window that gets hard afternoon sun and in a house that runs very dry through a central Indiana winter. It's not common and it isn't sudden. Keeping the shade off a hot glass surface during peak sun helps, and so does normal indoor humidity in January. A single split cane on a woven shade is usually cosmetic and stays put, since the string holds the weave together rather than the cane doing the structural work.
Areas We Serve

Woven Wood Shades Across Avon

We measure and install in every one of these Avon neighborhoods. Each has its own page with the build eras, window conditions and mounting notes for that section.

Related Services

Other Window Treatment Services in Avon

Avon Window Treatments handles the full scope of window treatment work. Explore our other services below.

Faux Wood Blinds in Avon

The blind that shrugs off an Avon August

Learn more →

Wood Blinds in Avon

Basswood for the rooms with stained casing

Learn more →

Vertical Blinds in Avon

Still the honest answer for a wide patio slider

Learn more →
Free In-Home Measure

Schedule Your Free In-Home Measure in Avon

Contact Information

Reach Us Directly

Our team prioritizes scheduled measures and service calls, and books in-home measures during business hours.

Office
1417 Commerce Avenue, Indianapolis, IN 46201
Hours
Mon-Fri 8a-6p
Service Area
Avon, IN and Surrounding Areas

Ready to Book Your Measure?

Call us to set up an in-home measure, or to ask about a treatment that has stopped working. We will talk it through on the phone first.

Call (317) 854-7158
Service area

Serving Avon and the surrounding area

Call NowGet Quote