Roman Shades

Roman Shades Across Avon, IN

Fabric that folds, with the stack accounted for

Call (317) 854-7158Get Free Quote
Quick Answer

The questions below deal with specification rather than sales. Sizing, mount type, material choice and operation. Get those right and the aesthetic decisions take care of themselves.

  • Service: Roman Shades for Avon homeowners
  • Service area: Avon, IN and surrounding areas
    • Realistic sequence: appointment for the measure, a written specification, then fabrication of two to five weeks, then install. None of it needs rushing, and pushing the factory is where mistakes on custom sizes come from.
  • Insured and bonded
  • Serving Avon, IN since 2008
Roman Shades Services

Expert Roman Shades for Avon Homes

A Roman shade is fabric doing the work of a blind, and it belongs in the rooms Avon builds for looking at rather than working in. Avon Estates fits it well: roughly 115 homes across Sections 1 to 4, a median build year around 2000, and interiors finished to a covenant that puts brick across the entire ground level. Prestwick's older sections, wrapped around a course that opened in 1974, are the other natural home for it, because those rooms have applied wood casing to mount against. Flat fold reads tailored, relaxed fold reads soft, and both hide a headrail behind fabric.

The cost of that softness is stack height. Folded up, a Roman shade holds every inch of its own fabric at the head of the window, so a 60 inch drop parks eight to fourteen inches of material across the top of your glass depending on fold style and lining. On a short opening you lose real view. There's a second thing to plan for: fabric is dyed in lots, and a panel ordered next year for the two windows you forgot won't match the first run under afternoon light. We order a room at once and keep the cuttings.

When to Call

Signs You Need Roman Shades

If you notice any of these in your Avon home, it is worth booking a measure. None of it is urgent, and none of it fixes itself either.

The fabric you loved is nearly discontinued

Two windows in one room no longer match

A window seat has nothing usable on it

A stair landing window has never been treated

Cloth over the cooktop has gone dark and greasy

One shade hangs lower on the left side

Panels pile on the floor and collect dust

Rings and tapes print through in afternoon sun

A window seat needs something that stacks cleanly

Ready-made panels never fit the opening properly

Our Process

How Avon Window Treatments Handles Roman Shades

Every job follows the same five-step process. Transparent, thorough, and done right the first time.

1

Fold style and count specified

2

Order placed, finished sizes confirmed

3

Steamed, folds dressed and trained

4

Fiber matched to room humidity

5

Extra yardage set aside

Real Project Photos

Roman Shades in Avon

Photographs from real roman shades jobs completed by our crew in Avon and surrounding areas.

Custom shades measured and installed in Avon
Scope of Work

What Roman Shades Includes

Every Avon job is documented item by item. Here is what the crew covers.

Three widths and three heights taken at every opening, then a diagonal check so the shade hangs level

Mounting depth read at the top of the opening to see whether the stacked folds clear the trim on an inside mount

Stack height calculated from finished height, fold count and lining, then shown to you before anything is ordered

Outside mount height set above the opening wherever the stack would otherwise sit across the glass

Fold style specified room by room: flat, relaxed, hobbled or London

Fold count and fold depth written on the order so the bottom fold doesn't come up short

Lining specified per elevation, light filtering or room darkening or none, and stated in writing

Interlining added where the face fabric needs body or where the room wants weight and quiet

Pattern repeat measured so the motif lands at the same height on every shade in a room

Fabric run direction decided against the width, since a wide shade may need the goods turned

Ring rows and dowel pockets drawn to the fold spacing instead of a factory default

Lift chosen as cordless, a continuous cord loop with a tensioner, or a motor

Cord safety handled to ANSI/WCMA A100.1-2022, with cordless specified anywhere a child can reach

Mounting board wrapped in the face fabric where the board itself will show from the room

Return depth dimensioned on outside mounts so the sides close off against the wall

Brackets fastened into framing or into anchors rated for a lined shade's weight, not into bare drywall

Shades steamed on site so the creases from folding and shipping fall out of the cloth

Folds dressed by hand and the shade cycled a few times so every fold trains and breaks in the same place

Pricing

What Roman Shades Cost in Avon

National category figures put stock shades at roughly $60 to $600 per window and custom-fabricated shades at roughly $250 to $2,600 per window. Those are national ranges published for a category, not a price for any address in Avon, and Avon Window Treatments quotes from a measure rather than an average. Romans usually sit in the upper part of that band, because what you're buying is yardage and sewing rather than cloth wrapped on a tube. Fabric moves the number first and it's sold by the yard, so a large pattern repeat adds cloth before anyone cuts. Lining and interlining come next. Then fold style, since a hobbled shade eats noticeably more fabric than a flat one of the same size. Two Hendricks County windows of identical size can land far apart on cloth alone.

By Product

How Roman Shades Differ by Product

Every product in this trade behaves differently in a room. Here is what that means for this work.

Flat Roman: One uninterrupted face of fabric when the shade is down, with folds appearing only as it rises. It shows a print or a weave better than any other style, and it's the one we specify in rooms that want a quiet, tailored line.

Relaxed Roman: Built without a dowel in the bottom fold, so the hem carries a soft curve instead of a straight line. It suits a kitchen window over a sink or a casual room, and it forgives a slightly unlevel opening better than a flat shade does.

Hobbled Roman: Permanent cascading folds stay stacked down the whole face whether the shade is up or down. It reads soft and traditional, it uses considerably more yardage, and it stacks much taller when raised. Plan the mount height around that.

London shade: Gathered at two points with soft tails falling at each side, usually hung as a stationary treatment or one that gets raised rarely. It's a decorative shade for a powder room, a stair landing or a window that never needs daily operation.

Dowel and ring construction: Rods sit in sewn pockets across the back and rings carry the lift cord. Pocket spacing sets fold depth, and drawing it against the finished height is how you avoid a runt fold at the bottom of an odd-height window.

Cotton sateen lining: The standard backing. It gives the shade body so folds hold their shape, it slows fading of the face fabric, and it puts the same neutral face toward the street from every window on an elevation.

Interlining: A soft flannel layer between face fabric and lining. It thickens the fold, quiets the room a little, adds real insulating bulk at a cold January window, and it turns a thin decorator fabric into a shade with weight.

Cordless lift: A spring-assisted mechanism raises and lowers the shade by hand with no loop hanging anywhere. It's the default in nurseries and any room a child uses, and on a lined Roman it wants correct spring sizing for the actual fabric weight.

Motorized Roman: A battery or hardwired motor lifts the shade on a remote or a schedule. It earns its keep on a shade above a stair, over a sink or on a tall window, and battery wands need changing about once a year.

Wrapped mounting board: The board the shade staples to, covered in the face fabric so it disappears when the shade is mounted outside the opening. Without it you see raw lumber above the shade from anywhere in the room.

Light Control

See What Each Fabric Does To The Light

Pick a fabric below and the window updates. It's a drawing rather than a photograph, so read it as a rough guide to what each family does in a Avon room, and to what it doesn't do.

Fabric type

Sheer, 10 percent openness

Ten percent of the weave is open, so you keep the view and most of the daylight. Glare drops a little. After dark, once your lamps are on, someone outside can read shapes through it, which is why this belongs on a view window rather than a bedroom.

Openness factor is printed on the fabric card, so you can compare one line against another before you order anything.

Keeps the viewNot private after dark

Solar, 5 percent openness

The usual pick for a west window or a covered porch. You can still read the yard through it, glare comes down noticeably, and the fabric intercepts a good share of the sun before it reaches you at four in the afternoon.

It also cuts the UV landing on floors and furniture. NFRC puts UV at roughly 40 to 60 percent of fading damage, so this slows fading rather than stopping it.

View and glare controlSlows fading

Solar, 3 percent openness

A tighter weave. The room goes dimmer and the view drops back to an outline. Choose it where the sun is the problem and the view is second, which around here usually means a west wall in July. That's a common call on this side of Indianapolis.

Openness affects how much you see out, not how private you are. A 3 percent fabric still shows silhouettes at night.

View becomes an outlineStrong glare control

Solar, 1 percent openness

Close to a solid fabric with a little view left in it. This is the strongest glare control in the solar family.

The trade is that it darkens the room on a gray January day too. Indianapolis averages a January high near 36F and the light is flat, so think about how the room reads in both seasons before you commit.

Darkest solar optionDim on gray days

Light filtering

No view through it. Daylight comes through the face diffused, so the room stays bright without a hot spot across the television or the kitchen island. This is the default for living spaces.

It isn't private in reverse at night. With the lamps on and the sun down, silhouettes still show.

No view through itBright without the glare

Room darkening

A denser fabric, usually with a liner behind it. Most of the light coming through the face is gone.

Light still arrives around the edges on an inside mount, so a room darkening shade gives you a dim room rather than a dark one. If someone in the house sleeps during the day, say so at the measure and we'll scope it differently.

Dim, not darkEdges stay bright

Blackout

The fabric itself passes essentially no light. What you'll still see is the perimeter. Lutron publishes an inside-mount light gap of about 3/4 inch per side on its Roller 20 and 64 shades, along with a standard factory deduction of 1/16 inch per side, and shades over 120 inches tall or past a 4:1 height-to-width ratio get larger gaps than that.

So if you need a genuinely dark bedroom, that gap has to be dealt with on purpose, either with side channels or by going outside mount. We tell you which one your opening can carry while we're still standing in the room.

Dark facePerimeter needs a plan

Openness factor is a measured fabric spec, so you can compare it line to line. The category names are not measured. One maker's room darkening can behave like another maker's light filtering, which is why the sample books come to the measure and get opened in the room they're going in, at the hour that room has the problem.

Common Questions

Roman Shades FAQ

Questions we hear most often from Avon homeowners considering roman shades.

More than most people picture. A flat fold Roman on a 60 inch drop stacks roughly eight to ten inches at the head, and a relaxed or hobbled style with a heavier lining can reach fourteen. That stack sits over the glass unless you mount above the opening and give it a place to live on the wall. In Avon Trails, where the average home is 1,712 square feet and windows are small to begin with, that loss is the reason we often steer people to a cellular or a roller instead. In a tall Prestwick room, the same stack is invisible.
Flat fold, nine times out of ten. Avon Estates runs 73 percent ranch or one and a half story with main level living, so the formal rooms sit at single story head height where a crisp horizontal line looks correct against the trim. A relaxed fold, with its gentle smile along the bottom, wants a taller window and a looser room to make sense, and it never hangs quite the same twice. Where a house has the covenant brick ground floor and heavy casing, the flat fold echoes those lines. We build a mock up in your fabric before committing on any window over about 48 inches wide.
It can be lined, and it still won't be dark. A blackout liner stops light through the body of the shade, but a Roman hangs from a headrail with the fabric standing off the glass, so light comes around both sides and over the top regardless of what the liner does. In an Oaks of Avon bedroom, where every recent sale was a two story with bedrooms upstairs, we'd rather run a blackout roller with side channels against the opening and hang the Roman outside it as the decorative layer. That's two treatments on one window, and we'll tell you the cost before you decide.
The pattern usually is. The dye lot won't be. Fabric runs are dyed in batches and the color shifts slightly from batch to batch, which nobody notices across a hallway and everybody notices on the same wall in afternoon light. Avon Estates homes range from about 1,705 to 3,816 square feet, so a phased approach is common here, and the way we handle it is simple: order the full yardage now even for windows you're treating later, and store the remnant. If that isn't practical, we plan the phases room by room so no two batches ever meet.
Yes, and the mount decides everything. On an inside mount the fabric hangs inside the opening and stops at the sill, which looks clean but leaves the side gaps every inside mount has. On an outside mount the shade covers the trim and hangs past the sill, which darkens the room better but means the bottom of the shade sits in front of a seat cushion. Cedar Bend and Timber Bend both carry custom plans with deep masonry reveals and built in seating, and on those we usually inside mount and accept the gap, since the sill is the feature.
There is, and it's lower than people expect. A cordless Roman lifts on a spring balanced to the fabric weight, and heavy linings, wide widths and long drops all push past what a spring holds reliably. Past roughly 40 to 50 square feet of face, depending on the fabric, we move to a continuous cord loop with an anchored chain tensioner or to a motor. In a Cedar Bend great room where houses run to 6,705 square feet, that decision gets made at the measure rather than after a shade starts creeping down on its own.
More than most people picture, and this is the part nobody asks about until it's hanging. A raised Roman gathers into a stack of folded cloth at the top, and that stack has real depth. A lined shade on a tall window can take up a foot or more of height when it's all the way up. On an inside mount, that stack sits over the top of the glass all day. The fix is knowing the number before you order, which is why we calculate it at the measure and show it to you.
Start with the room rather than the catalog. A flat Roman is the cleanest and shows a pattern best, so it goes in rooms that want a tailored line. A relaxed shade has a soft curve in the hem and reads casual, which suits kitchens and cottage-style rooms. Hobbled keeps its folds all the way down and looks traditional, but it uses more cloth and stacks taller. A London shade is decorative and mostly stationary. We bring samples of the same fabric made three ways so you can see it rather than imagine it.
Inside looks cleaner and shows off your trim, but it needs depth, and the stack still lands over your glass when the shade is up. Outside mount is what we reach for when the view matters, because the board can go well above the opening and the whole stack sits on wall instead of window. Outside also closes off the light gaps at the sides. In a Avon room with a view worth keeping, outside mount is usually the right call even though it covers a little trim.
A room darkening or blackout lining stops light coming through the cloth, and that's genuinely most of the light. What it can't do is stop light coming around the shade. An inside-mounted Roman leaves a gap at each side, and light walks straight through it. For a bedroom that has to be dark, you want an outside mount with generous overlap, or a blackout roller with side channels underneath and the Roman on top for looks. We'd rather say that now than after you've paid for lining.
Yes, and in most houses you should. Cordless lift uses a spring mechanism you operate by grabbing the hembar, and motorized removes the question entirely. ANSI/WCMA A100.1-2022 is the product safety standard this trade works to, and inner cords that aren't compliant are treated as a substantial product hazard under 16 CFR 1120.3. On a heavy lined shade the spring has to be sized to the actual fabric weight, so tell us about the lining before the order goes in, not after.
Wider than you'd think and narrower than you'd like. Fabric shades get heavy fast, and past a certain width the cloth starts to sag between the rings and the lift gets hard to work. On a wide opening we'll usually split it into two shades on one board, matched at the pattern so they read as a pair. That also keeps each shade at a weight a person can raise without a fight. The exact limit depends on the fabric and the lining, which is why we decide it at the window.
Because you're buying cloth by the yard and then paying someone to sew it. A shade that takes four yards of a mid-priced fabric and a shade that takes seven yards of an imported weave aren't in the same conversation, and the second one hasn't even reached the sewing table yet. Pattern repeat adds yardage on top, since motifs have to land at the same height across a room. Fold style adds more. We figure yardage during the quote so the number isn't a surprise on the order.
They will if the shade was built and dressed properly. Fold spacing is set by the dowel pockets and ring rows, so it's baked into the construction rather than something that drifts. What does go wrong is a shade that was never trained: it arrives folded flat from the factory, gets hung, and the shipping creases live in the wrong places forever. We steam on site, then dress each fold by hand and cycle the shade so the cloth learns where it bends.
In a kitchen, yes, with sense about placement. Fabric near a cooktop takes on grease and cooking smells, so we keep Romans on the window over the sink and off the window beside the range. In a full bathroom with a shower running daily, fabric holds damp and the folds can hold it longer. A poly shutter or a moisture-tolerant shade does better in that room. A powder room with no shower is fine, and a London shade there looks terrific.
Vacuum the face with a brush attachment a few times a year, working down the folds rather than across them. Steam wrinkles out instead of pressing them. For anything worse, use a cleaner who handles fabric window treatments specifically and will take the shade down and rehang it. Do not put a lined Roman in a washing machine. Face fabric, lining and interlining shrink at different rates, and the shade comes out with a wavy hem that nothing fixes.
A roller is the working answer: it rolls onto a tube, takes almost no height when it's up, and handles glare and privacy cheaply. A Roman is the design answer, because folded cloth softens a room in a way a flat panel of fabric on a tube never does. Rollers win on tall windows where stack height would eat the view and in rooms where you raise and lower every day. Plenty of houses use both, with rollers on the working windows and Romans where the room is meant to feel finished.
Sometimes, and plan as if you can't. Decorator fabric runs in dye lots, and a bolt woven a year from now can sit slightly off the one your shades came from. On the same wall in daylight, that difference shows. If you know a second phase is coming, buy the yardage now even if the sewing waits. Either way we record the fabric name, the lot and the finished sizes on your file, which gives a reorder a real chance instead of a hope.
It's a soft flannel layer sewn between the face fabric and the lining, and it does three things at once that are hard to get any other way. It gives the fold depth and a rounded edge instead of a sharp crease. It quiets a hard-surfaced room. And it puts real bulk between the room and a cold window in January, which you feel standing near the glass. It also adds weight, so the lift and the brackets get sized for it.
Yes, and it's a common way to finish a room. The Roman does the working part, handling glare and privacy at the glass, while the panels add height and softness at the sides. Two things to check at the measure: the drapery rod needs enough projection to clear the raised stack of the Roman, and the shade's mounting board has to sit where the rod brackets won't fight it. Get the order wrong and the panels rub the shade every time they move.
Areas We Serve

Roman Shades Across Avon

We measure and install in every one of these Avon neighborhoods. Each has its own page with the build eras, window conditions and mounting notes for that section.

Related Services

Other Window Treatment Services in Avon

Avon Window Treatments handles the full scope of window treatment work. Explore our other services below.

Faux Wood Blinds in Avon

The blind that shrugs off an Avon August

Learn more →

Wood Blinds in Avon

Basswood for the rooms with stained casing

Learn more →

Vertical Blinds in Avon

Still the honest answer for a wide patio slider

Learn more →
Free In-Home Measure

Schedule Your Free In-Home Measure in Avon

Contact Information

Reach Us Directly

Our team prioritizes scheduled measures and service calls, and books in-home measures during business hours.

Office
1417 Commerce Avenue, Indianapolis, IN 46201
Hours
Mon-Fri 8a-6p
Service Area
Avon, IN and Surrounding Areas

Ready to Book Your Measure?

Call us to set up an in-home measure, or to ask about a treatment that has stopped working. We will talk it through on the phone first.

Call (317) 854-7158
Service area

Serving Avon and the surrounding area

Call NowGet Quote